Previous
Previous Product Image

EX320 Ultra Classic glue

Next

EX450 Tile glue diamond Marble fix glue

د.إ0
Next Product Image

EX420 ULTRA GOLD EX 420

د.إ0

Technical Specication:
TECHNICAL DATA compliant with Ultra Bond EX 420 quality standard
Appearance Powder
Composition Cement, Siliceous sand & Additives
Color Grey & White
Density 1 ± 0.05
Mixing water for use a slurry key 5L/1 bag 20kg
Open Time 25 minutes
Adjustability 45 minutes
Foot Trac 24 hours
Interval Before Normal Use 14 days
Voc <1 g/L ( USEPA 24)
Grouting 24 hours
Coverage 1 bag= 20kg/ 4.8m2 in 3mm thickness
Shelf life 12 months of the original packing in dry environment

 

Description

ULTRA GOLD EX 420
For fixing Tiles, Marbles, Granites, & other stones on interior & exterior wall and floor

Product Description:
It is polymer modified ed cement based quick set tile adhesive specially designed for heavy duty applicants for xing vitried tiles, slabs, natural stones and large size tiles on interior and exterior wall and oor surfaces. it is highly suggested for exterior areas, because it resists thermal expansion.

Characteristics:
Temperature and chemical resistant very good adhesion
Non toxic
Water cleanup of un cured adhesive Very easy to apply
Dual purpose for wall and oor High bond strength Economical

Recommended use:
Specially designed for interior & exterior oor & wall applications.

(ceramic, sandstone, granite, marble, porcelain, etc.) on the following Substrates Concrete, Lightweight blocks, Stone walls (cleaned and prepared),Glazed tiles (internal use),Cementations plaster and renders, Gypsum Board.

Ultra BOND EX 420 also uses in swimming pools, Bathrooms, Stairs, Heated oors, Rooms, Parking etc.

Instruction for use:
Add 5 litter clean water with 20kg of Ultra BOND Gold EX 420 and stir well until a lump free compound is achieved. The surface to be tiled should be clean and sound.

Old surfaces must be free from any kind of grease oils wax etc. At site addition of water shall be adjusted to attain desired consistency and mix thoroughly until a homogeneous paste is obtained. Allow tiling to set for 24 hours prior to lling joints.

Precautions:
Apply Ultra BOND EX 420 on the substrate by areas of around 1 m2 each, which can be tiled within a maximum of 25 minutes from application time
at 23°C.

After that time, an outer skin may form thus preventing the tile from adhering properly to Ultra BOND EX 420.

Adjustments to the tiles should only be made during Ultra BOND EX 420 open time. It is recommended to leave a minimum width of 2 mm around the tiles.
Grouting the tile joints should only be done at least 24 hours after tiling, using Ultra Joint Filler EX-20.

FOR INQUIRY

Call/Whatsapp – 0503310489

Shopping cart

1

Subtotal: د.إ0

View cartCheckout